Monitor Power/Signal Issues – GeiG Dade X

• Maintenance and Repairs
• Applies to: GeiG Dade X + External Monitors

If your monitor shows “No Signal” or flickers when connected to your Dade X, follow these steps.

Check Physical Setup:

• Ensure the HDMI or USB-C to DisplayPort cable is fully inserted
• Try alternate input on the monitor (HDMI1 → HDMI2)

Windows Display Settings:

1. Press Win + P → Select Duplicate or Extend
2. Right-click desktop → Display Settings
3. Confirm the monitor is detected and set to native resolution

Advanced Steps:

• Update GPU drivers via geig.co.uk/support/dade-x

Check Physical Setup:

• Ensure the HDMI or USB-C to DisplayPort cable is fully inserted
• Try alternate input on the monitor (HDMI1 → HDMI2)

Windows Display Settings:

1. Press Win + P → Select Duplicate or Extend
2. Right-click desktop → Display Settings
3. Confirm the monitor is detected and set to native resolution

Advanced Steps:

• Update GPU drivers via geig.co.uk/support/dade-x
• Reboot in Safe Mode to test the display hardware
• Disable HDR if the monitor doesn’t support it